Below Ground Building Entry Fitting
PE x Pipe End suitable for welding
Andy Hatton
National Sales Manager – Gas
Below Ground Building Entry Fitting Kitemark approved to GIS/PL3. Maximum working pressure: SDR17 = 2bar SDR11 = 5.5bar, Temperature Range: -20°C to +40°C
The Donkin Series 218 underground entry fitting is a simple transition fitting to connect PE service pipes into the
interior of a building via an underground entry. The fitting provides a steel onward connection to connect to
interior pipework. The PE/ steel connection is done under controlled factory conditions and has been fully type
tested to GIS/PL3 specification.
| Variant 218/31-002 | |
|---|---|
| Material: | Steel |
| DN: | DN90 - DN180 |
| PN: | PN 5.5 |
Features
- PE 80 SDR11 pipe.
- Screwed connection from 3/4" to 2".
- Plain ended from 3" to 6".
- Range of body lengths and PE pipe lengths.
- Epoxy coating.
- Extra pipe lengths to customer requirements.
- Embodied Carbon Data Available upon request
Downloads
Datasheet
Certificate(s)
Price list
Reference nos. and dimensions:
Scroll for more info
| Ref. no. | D mm |
PE Length mm |
Through wall L / mm |
Pipe dia. mm |
Connection |
Theoretical weight/kg |
|---|---|---|---|---|---|---|
| 218-0903-050-05 | 110 | 500 | 500 | 90 | 3" PLAIN | 10 |
| 218-0903-075-12 | 110 | 1250 | 750 | 90 | 3" PLAIN | 16 |
| 218-1254-050-10 | 125 | 1000 | 500 | 125 | 4" PLAIN | 19 |
| 218-1254-075-12 | 125 | 1250 | 750 | 125 | 4" PLAIN | 25 |
| 218-1254-100-15 | 125 | 1500 | 1000 | 125 | 4" PLAIN | 31 |
| 218-1806-050-102 | 200 | 1000 | 500 | 180 | 6" PLAIN | 33 |
| 218-1806-075-122 | 200 | 1250 | 750 | 180 | 6" PLAIN | 43 |
| 218-1806-100-152 | 200 | 1500 | 1000 | 180 | 6" PLAIN | 53 |
| 218-1806-120-152 | 200 | 1500 | 1200 | 180 | 6" PLAIN | 60 |
| 218-2508-120-152 | 279 | 1500 | 1200 | 250 | 8" PLAIN | 74 |
Enquiry
Scroll for more info
Components
| 1. | Pipe | PE 80 |
| 2. | Shrink Sleeve | Polyolefin |
| 3. | Through Wall Protection Pipe | PE |
| 4. | Through wall pipe | Mild steel |
| 5. | Spigot | Mild steel |
| 6. | Sleeve | Mild steel |
Test/Approvals
- Pneumatic test to 1.1 x PN
- Approved according to Kitemark™ GIS/PL3, KM 575498
Standards
- Designed according to GIS/PL3
