AVK METAL SEATED GATE VALVE
Metal seat gate valve for drinking water and neutral liquids to max. 70°C
AVK metal seated wedge gate valves are primarily designed for the flow isolation of a length of pipeline or piece of equipment. It uses a ductile iron gate that houses bronze rings to ensure a watertight seal. The non-rising stem design ensures the stem thread is adequately lubricated by the water passing through the valve. In essence, the whole internals are water dependent for lubrication, a factor that safeguards the longevity of the valve.
| Variant 37/50-002 | |
|---|---|
| Connection: | Flanged |
| Material: | Ductile Iron |
| DN: | DN150 |
| PN: | PN 16 |
| Closing direction: | Clockwise to Close |
Features
Bronze wedge nut with lubricating abilities providing optimum compatibility with stem
The face ring which firmly secured to the wedge is machined to a fine surface finish to ensure optimum contact seal with body seat ring
Wedge with guides, which ensure uniform closure
A large through bore housing for the stem in the wedge prevents stagnant water or impurities
Round EPDM Bonnet Gasket fixed in a recess
Countersunk and sealed stainless steel bonnet bolts encircled by the Bonnet Gasket
Full bore
Internal and external blue two pack epoxy coating
For horizontal or vertical installation
Downloads
Reference nos. and dimensions:
| Ref. no. | DN mm |
Flange drillling |
L mm |
H mm |
W mm |
F mm |
F1 mm |
F2 mm |
Theoretical weight/kg |
|---|---|---|---|---|---|---|---|---|---|
| 37-150-50-210004 | 150 | PN16 | 267 | 498 | 285 | 28 | 35 | 63 | 43 |
Components
| 1. | Body | Ductile Iron GJS-500-7 |
| 2. | Seat ring | Alu-bronze CC331G (AB1) |
| 3. | Face ring | Alu-bronze CC331G (AB1) |
| 4. | Wedge | Ductile Iron GJS-500-7 |
| 5. | Wedge nut | Alu-bronze CC331G (AB1) |
| 6. | Stem | Stainless steel 1.4021 (420) |
| 7. | Socket head bolt | Hot dip galvanized steel |
| 8. | Bonnet gasket | EPDM |
| 9. | Bonnet | Ductile Iron GJS-500-7 |
| 10. | O-ring | EPDM |
| 11. | O-ring | EPDM |
| 12. | Thrust collar | Brass CZ132 |
| 13. | Gland | Ductile Iron GJS-500-7 |
| 14. | Socket head bolt | Hot dip galvanized steel |
| 15. | Bushing | PA |
| 16. | O-ring | EPDM |
| 17. | Wiper ring | NBR rubber |
| 18. | Stem Cap | Cast iron GJL-250 |
| 19. | Bolt | Hot dip galvanized steel |
Test/Approvals
- Seat: 1.1 x PN. Body: 1.5 x PN.
Standards
- Designed according to BS EN 1074 -1 and 2
- Face to face according to EN 558 Table 2 Basic Series 3
- Standard flange drilling to EN1092 (ISO 7005-2), PN 16
- Drinking Water Inspectorate Regulation 31 compliant