1. Home /
  2. Product finder

AVK METAL SEATED GATE VALVE, PN10/16 DN350-1800

SS 1.4401/316 stem, alu-bronze seat, A4 bolts, CTC/CTO, 300µm blue FBE/2-pack

Mamoun Humayra, AVK UK Product Manager - Water

Mamoun Humayra

Water Product Manager

Metal seat gate valves with rotating, non-rising stem. Operating direction clockwise to close or clockwise to open. For drinking water and neutral liquids to max. 70°C. On DN300-600 operation is either by manual handwheel/gearbox or by electric actuation; on DN≥700 operation is possible only via gearbox or actuator that is able to support the axial thrust loads.

AVK series 54 gate valves are designed with built-in safety and quality in every detail. The metal valve seat is resistant to high temperatures in the medium and will not deform during long periods of compression. This ensures stable and reliable operation over the long life span of the valve.

Variant 54/3132-007
Connection: Flanged
Material: Ductile Iron
DN: DN350 - DN1200
PN: PN 16

Features

  • High strength alu-bronze valve seat
  • Metal faces machined to a high finish for optimum contact and minimum leakage
  • Stem in high grade 1.4401/AISI316 stainless steel
  • DN350-600 four separate and independent O-ring stem seals
  • DN≥700 stuffing box with ample depth gives long life to the PTFE packing
  • Round body-bonnet O-cord gasket fixed in a recess to avoid blow-out
  • Full bore
  • Lifting eyes for easy handling
  • All rubber and coating in contact with the water are drinking water approved
  • Guides on the wedge helps provide steady operation
  • Fasteners in A4 stainless steel
  • DN 350-1000 protected by 300µm blue fusion bonded epoxy coating
  • DN≥1100 protected by 300µm blue 2-pack epoxy coating
  • Prepared for by-pass

Downloads

Related Datasheets
Price list
Installation, Operation & Maintenance
Certificate(s)
Datasheet

Reference nos. and dimensions:

Scroll for more info
Ref. no. DN
mm		 Operating
Direction		 Flange
drillling		 L
mm		 H1
mm		 H2
mm		 W
mm		 W1
mm		 F
mm		 F1
mm		 F2
mm		 ISO
Flange		 Theoretical
weight/kg
54-0350-31-1201200 350 CTC PN16 381 782 265 605 325 40 48 162 14 254
54-0350-32-1201200 350 CTO PN16 381 782 265 605 325 40 48 162 14 254
54-0400-31-1201200 400 CTC PN16 406 857 295 657 355 40 48 162 14 288
54-0400-32-1201200 400 CTO PN16 406 857 295 657 355 40 48 162 14 288
54-0450-32-1201200 450 CTO PN16 432 944 325 720 385 40 48 162 14 407
54-0500-31-1201200 500 CTC PN16 457 1017 365 790 425 40 48 162 14 516
54-0500-32-1201200 500 CTO PN16 457 1017 365 790 425 40 48 162 14 516
54-0600-32-0201200 600 CTO PN10 508 1178 440 905 485 40 48 162 14 633
54-0600-32-1201200 600 CTO PN16 508 1178 440 905 485 40 48 162 14 633
54-0700-31-1201200 700 CTC PN16 610 1497 450 1050 421 - - 116 14 1416
54-0700-32-1201200 700 CTO PN16 610 1497 450 1050 421 - - 116 14 1416
54-0800-31-1201200 800 CTC PN16 660 1689 535 1160 495 - - 116 14 1766
54-0800-32-1201200 800 CTO PN16 660 1689 535 1160 495 - - 116 14 1766
54-0900-31-1201200 900 CTC PN16 711 1844 596 1310 535 - - 118 14 2317
54-1000-31-1202200 1000 CTC PN16 813 2007 648 1404 602 - - 136 16 3059
54-1000-32-1202200 1000 CTO PN16 813 2007 648 1404 602 - - 136 16 3059
54-1100-31-1402200 1100 CTC PN16 811 2382 700 1505 627 - - 160 16 4000
54-1100-32-1402200 1100 CTO PN16 811 2382 700 1505 627 - - 160 16 4000
54-1200-31-1402200 1200 CTC PN16 914 2427 773 1712 694 - - 136 16 4691
54-1200-32-1402200 1200 CTO PN16 914 2427 773 1712 694 - - 136 16 4691
3D drawings
Enquiry
Scroll for more info

Components

1. Body Ductile Iron GJS-500-7
2. Seat ring Alu-bronze CC331G (AB1)
3. Face ring Alu-bronze CC331G (AB1)
4. Wedge Ductile Iron GJS-500-7
5. Wedge nut Alu-bronze CC333G (AB2)
6. Stem Stainless steel 1.4462, duplex
7. O-cord EPDM
8. Bonnet Ductile Iron GJS-500-7
9. Air plug Stainless steel
10. Key Steel
11. Bolts Stainless steel A4
12. Blanking plate Ductile Iron GJS-500-7
13. O-ring EPDM
14. Stem Cap Ductile Iron GJS-500-7
15. Seal Hot melt glue
16. Gland flange Ductile Iron GJS-500-7
17. Thrust collar Alu-bronze CC331G (AB1)
18. Gland flange bolt Stainless steel A4
19. Seal Hot melt glue
20. Bonnet bolt Stainless steel A4
21. Thrust nut Alu-bronze CW307G
22. Distance piece Ductile Iron GJS-500-7
23. Gland Ductile Iron GJS-500-7
24. Packing PTFE
25. Stuffing box Ductile Iron GJS-500-7

Test/Approvals

  • Hydraulic test according to EN 1074-1 / EN 12266

Standards

  • Designed according to BS EN 1074 -1 and 2
  • Standard flange drilling to EN1092 (ISO 7005-2), PN 10/16
  • WIMES 8.09 Compliant
  • Drinking Water Inspectorate Regulation 31 compliant
0 Files In the package