AVK FLANGED GATE VALVE, EN 1074, PN16

Bosses for by-pass, EN558/3, SS stem, A2 bolts, EPDM

Mamoun Humayra, AVK UK Product Manager - Water

Mamoun Humayra

Water Product Manager

Flanged gate valve for drinking water and neutral liquids to max. 70°C

AVK gate valves are designed with built-in safety in every detail. The wedge is fully vulcanized with AVK’s own drinking water approved EPDM rubber compound. It features an outstanding durability due to the ability of the rubber to regain its original shape, the double bonding vulcanization process and the sturdy wedge design. The triple stem seal system, the high strength stem and the thorough corrosion protection safeguard the unmatched reliability.

Variant 55/67-004
Connection: Flanged
Material: Ductile Iron
DN: DN700 - DN1000
PN: PN 16
Closing direction: Clockwise to Close

Features

  • Fixed, integral wedge nut prevents vibration and increases durability
  • Polyamide wedge shoes protect the wedge rubber during opening and closing
  • Stainless steel stem with wedge stop
  • A large conical stem hole in the wedge prevents stagnant water
  • Three independent stem seals: an NBR wiper ring protects against dust from outside, two NBR O-rings protect the radial bearing and innermost two EPDM O-rings act as the main seal to the flow
  • Axial thrust bearing with PTFE coated stainless steel washers provides low operating torques
  • Removable gland flange for replacement of thrust- and radial bearings and seals under pressure
  • Round bonnet gasket fixed in a recess to prevent blow-out
  • Counterbored stainless steel bonnet bolts encircled by the bonnet gasket and sealed with hotmelt glue
  • ISO actuator flange; electric actuator or gearbox is recommended
  • Integrated lifting eyes for easy handling
  • 3/4" connection plug for installation of air valve
  • Epoxy coating to DIN 30677-2, GSK approved
  • All rubber parts with multiple drinking water approvals (DVGW, WRAS)
  • For installation with horizontal or vertical stem
  • Detachable covers at the bottom for flushing of wedge rail
  • Bosses for by-pass valve

Downloads

Datasheet
Certificate(s)
Price list

Reference nos. and dimensions:

Scroll for more info
Ref. no. DN
mm
Flange
drillling
L
mm
W
mm
H
mm
H3
mm
F2
mm
D2
mm
Dh
mm
Ds
mm
Bolt
No.
ISO
Flange
Theoretical
weight/kg
55-700-67-0146400001 700 PN16 610 1264 1621 2076 80 40 840 37 24 F16 1619
55-800-67-0146400001 800 PN16 660 1244 1671 2184 80 40 950 41 24 F16 1681
55-900-67-0146400001 900 PN16 711 1555 2117 2680 81 40 1050 41 28 F16 3342
55-1000-67-014464 1000 PN16 813 1555 2067 2695 81 40 1170 44 28 F16 3412
3D drawings
Enquiry
Scroll for more info

Components

1. Bonnet Ductile Iron GJS-500-7
2. Body Ductile Iron GJS-500-7
3. Grooved pin Stainless steel
4. Wedge rubber EPDM
5. Wedge nut Brass CW724R
6. Wedge Ductile Iron GJS-500-7
7. Wedge shoe PA 6.6
8. O-ring EPDM
9. Cover plate Ductile Iron GJS-500-7
10. Key Stainless steel
11. Stem Stainless steel 1.4057
12. Gland flange Ductile Iron GJS-500-7
13. Thrust collar Alu-bronze CW307G
14. Wiper ring NBR rubber
15. Radial bearing PA
16. O-ring NBR rubber
17. Thrust washer Stainless steel 1.4057
18. Seal Hot melt glue
19. Thrust bearing Stainless steel / PTFE coated
20. O-ring NBR rubber
21. Bolt Stainless steel A2
22. O-ring EPDM
23. Seal Hot melt glue
24. Bonnet bolt Stainless steel A2
25. Bonnet gasket EPDM
26. Plug for fittings Stainless steel 1.4404
27. Blind plug Stainless steel 1.4462, duplex
28. Blind plate Ductile Iron GJS-500-7

Test/Approvals

  • Seat: 1.1 x PN (in Bar), Body: 1.5 x PN (in Bar). Closing torque test.

Standards

  • Designed according to BS EN 1074 -1 and 2
  • Face to face according to EN 558 Table 2 Basic Series 3
  • Standard flange drilling to EN1092 (ISO 7005-2), PN 16
0 Files In the package