AVK PRESSURE REDUCING CONTROL VALVE, PN10/16

Reduced bore, EN558/s, AISI304 fittings, EPDM/WRAS rubber, 300µm blue EP

Luka Helijic AVK

Luka Heljic

Business Development Manager - Air & Control Valves

Control valve, pressure reducing, for drinking water or other neutral liquids to max. 70°C. The series offer two ranges, red bore and full bore. The full bore has increased capacity comparred to reduced bore. For further info on full bore see separate datasheet 879/100X99-001.

AVK series 879 diaphragm actuated pressure reducing control valves (PRV) automatically maintain a constant outlet pressure regardless of flow demand or changes in inlet pressure. A replaceable spring inside the pilot makes it possible to operate in different pressure ranges and still keep the high precision. Setting and adjustment on a handwheel on the pilot.

Variant 879/000X99-001
Connection: Flanged
Material: Ductile Iron
DN: DN100 - DN150
PN: PN 10/16

Features

  • The lifted seat design controls the flow around the plug so that in case of cavitation this happens with minimal damage away from plug and seat
  • The parabolic shape of the plug creates a smooth regulating characteristic with low gain around the near-closed positions improving control performance at low flow
  • Non-symmetric axial position of rubber diaphragm results in low stretch stress when closed
  • Body and bonnet of ductile iron coated with fusion bonded epoxy, 300 micron, GSK approved, RAL 5017, according to DIN 3476 and WRAS-DVGW/W270/UBA
  • All rubber parts approved for drinking water
  • All non-coated internals made of stainless steel or bronze
  • A needle valve fitted between the upstream side and the control chamber allows for adjustment of the regulation reaction time
  • Closing the needle valve isolates the control chamber and fixes the position of the main valve allowing for service of the pilot valve
  • Fittings, pipes and accessories in Ni-plated brass
  • Available with Position Indicator upon request

Reference nos. and dimensions:

Ref. no. DN
mm
Flange
drillling
Pilotrange
bar
D1
mm
D2
mm
D3
mm
DH
mm
W
mm
H3
mm
L
mm
Theoretical
weight / kg
Enquiry
879-0100-00-14400059999 100 PN10/16 2-15 156 180 220 19 291 420 350 28
879-0150-00-14400059999 150 PN10/16 2-15 211 240 285 23 350 480 480 45

Downloads

Datasheets
Certificate(s)
Installation, Operation & Maintenance

Components

1. Body Ductile iron GJS-500-7
2. O-ring EPDM
3. O-ring EPDM
4. Plug sealing EPDM
5. Hex Nut Stainless steel A2
6. Washer Stainless steel 304
7. Bolts Stainless steel A2
8. Diaphragm EPDM
9. Spring Stainless steel 304
10. Flat Seal EPDM
11. Flat Seal EPDM
12. Cover Ductile iron GJS-500-7
13. Hex Nut Stainless steel A2
14. Diaphragm Support Ductile iron GJS-500-7
15. Obturator Ductile iron GJS-500-7
16. Regulating Plug Stainless steel 304
17. Seat Stainless steel 304
18. Stem Stainless steel 304
19. Pilot valve Stainless steel
20. Pressure gauge Stainless steel
21. Ball valve
22. Needle valve Stainless steel
23.

Test/Approvals

  • Hydraulic test: 1.5 x PN |
  • Tested according to EN12266-1. Seat: 1.1 x PN (in Bar), Body: 1.5 x PN (in Bar)

     

  • WRAS approved Materials

Standards

  • Designed according to EN 1074 - 5
  • Face to face according to EN558 Table 2 Basic Series 1
  • Standard flange drilling to EN1092 (ISO 7005-2), PN 10/16
Our website uses cookies for statistical analysis, to improve our website and serve you optimally. By browsing our website or closing this banner, you consent to the use of cookies.
Cookie Policy